Wireless; Overview; What You Can Do In This Chapter; Controller Screen - ZyXEL Communications USG40 User Manual

9.1 Overview

Use the Wireless screens to configure how the ZyWALL/USG manages the Access Points (APs) that
are connected to it.

9.1.1 What You Can Do in this Chapter

• Use the Controller screen
APs to connect to the network.
• Use the AP Management screens
to the ZyWALL/USG.
• Use the MON Mode screen
the friendly AP list.
• Use the Auto Healing screen
area of the managed APs when one of the APs fails.
• Use the RTLS screen
Fi tags be part of Ekahau RTLS (Real Time Location Service). RTLS can track the location of APs
managed by the ZyWALL/USG to create maps, alerts, and reports.

9.2 Controller Screen

Use this screen to set how the ZyWALL/USG allows new APs to connect to the network. Click
Configuration > Wireless > Controller to access this screen.
Figure 198 Configuration > Wireless > Controller
C
(Section 9.2 on page
(Section 9.3 on page
(Section 9.4 on page
(Section 9.5 on page
(Section 9.6 on page 256) to allow managed APs with battery-powered Wi-
ZyWALL/USG Series User's Guide
241
H A PT ER
241) to set how the ZyWALL/USG allows new
242) to manage all of the APs connected
253) to assign APs either to the rogue AP list or
255) to extend the wireless service coverage
9

Wireless