ZyXEL Communications USG40 User Manual page 441

20.2.1.3 Set Up User Authentication Using the RADIUS Server
This step sets up user authentication using the RADIUS server. First, configure the settings for the
RADIUS server. Then, set up the authentication method, and configure the ZyWALL/USG to use the
authentication method. Finally, force users to log into the ZyWALL/USG before it routes traffic for
them.
Click Configuration > Object > AAA Server > RADIUS. Double-click the radius entry.
1
Configure the RADIUS server's address, authentication port (1812 if you were not told otherwise),
and key. Click OK.
Figure 313 Configuration > Object > AAA Server > RADIUS > Add
Click Configuration > Object > Auth. Method. Double-click the default entry. Click the Add
2
icon. Select group radius because the ZyWALL/USG should use the specified RADIUS server for
authentication. Click OK.
Chapter 20 Web Authentication
ZyWALL/USG Series User's Guide
441