More Information - ZyXEL Communications USG40 User Manual

Table 53 Monitor > System Status > Cellular Status (continued)
LABEL
Cellular System
Signal Quality

7.11.1 More Information

This screen displays more information on your mobile broadband, such as the signal strength,
IMEA/ESN and IMSI that helps identify your mobile broadband device and SIM card. Click Monitor
> System Status > More Information to display this screen.
Note: This screen is only available when the mobile broadband device is attached to and
activated on the ZyWALL/USG.
Figure 164 Monitor > System Status > More Information
The following table describes the labels in this screen.
Table 54 Monitor > System Status > More Information
LABEL
Extension Slot
Service Provider
Cellular System
Chapter 7 Monitor
DESCRIPTION
This field displays what type of cellular network the mobile broadband connection
is using. The network type varies depending on the mobile broadband card you
inserted and could be UMTS, UMTS/HSDPA, GPRS or EDGE when you insert a
GSM mobile broadband card, or 1xRTT, EVDO Rev.0 or EVDO Rev.A when you
insert a CDMA mobile broadband card.
This displays the strength of the signal. The signal strength mainly depends on the
antenna output power and the distance between your ZyWALL/USG and the
service provider's base station.
DESCRIPTION
This field displays where the entry's cellular card is located.
This displays the name of your network service provider. This shows Limited
Service if the service provider has stopped service to the mobile broadband card.
For example if the bill has not been paid or the account has expired.
This field displays what type of cellular network the mobile broadband connection is
using. The network type varies depending on the mobile broadband card you
inserted and could be UMTS, UMTS/HSDPA, GPRS or EDGE when you insert a
GSM mobile broadband card, or 1xRTT, EVDO Rev.0 or EVDO Rev.A when you
insert a CDMA mobile broadband card.
ZyWALL/USG Series User's Guide
198