Add/Edit White List Rule - ZyXEL Communications USG40 User Manual

Zywall/usg series

Hide thumbs Also See for USG40:

Table of Contents

Figure 300 Configuration > Network > Layer 2 Isolation > White List

The following table describes the labels in this screen.

Table 155 Configuration > Network > Layer 2 Isolation > White List

Enable White List Select this option to turn on the white list on the ZyWALL/USG.

18.3.1 Add/Edit White List Rule

This screen allows you to create a new rule in the white list or edit an existing one. To access this

screen, click the Add button or select an entry from the list and click the Edit button.

Note: You can configure up to 100 white list rules on the ZyWALL/USG.

Note: You need to know the IP address of each connected device that you want to allow

to be accessed by other devices when layer-2 isolation is enabled.

Chapter 18 Layer 2 Isolation

Note: You can enable this feature only when the security policy is enabled.

Click this to add a new rule.

Click this to edit the selected rule.

Click this to remove the selected rule.

To turn on an entry, select it and click Activate.

To turn off an entry, select it and click Inactivate.

This field is a sequential value, and it is not associated with a specific rule.

This icon is lit when the rule is active and dimmed when the rule is inactive.

This field displays the IP address of device that can be accessed by the devices connected

to an internal interface on which layer-2 isolation is enabled.

This field displays the description for the IP address in this rule.

Click Apply to save your changes back to the ZyWALL/USG.

Click Reset to return the screen to its last-saved settings.

ZyWALL/USG Series User's Guide

Show Quick Links

Table of Contents