ZyXEL Communications USG40 User Manual page 770

The following table describes the labels in this screen. See
information as well.
Table 310 Configuration > Object > Address/Geo IP > Address Group
LABEL
IPv4 Address Group Configuration
Add
Edit
Remove
Object
References
#
Name
Description
Reference
IPv6 Address Group Configuration
Add
Edit
Remove
Object
References
#
Name
Description
42.6.3.1 Address Group Add/Edit Screen
The Address Group Add/Edit screen allows you to create a new address group or edit an existing
one. To access this screen, go to the Address Group screen (see
click either the Add icon or an Edit icon in the IPv4 Address Group Configuration or IPv6
Address Group Configuration section.
Chapter 42 Object
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to be able to modify the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL/USG confirms you want to
remove it before doing so.
Select an entry and click Object References to open a screen that shows which settings
use the entry.
This field is a sequential value, and it is not associated with a specific address group.
This field displays the name of each address group.
This field displays the description of each address group, if any.
This displays the number of times an object reference is used in a profile.
Click this to create a new entry.
Double-click an entry or select it and click Edit to be able to modify the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL/USG confirms you want to
remove it before doing so.
Select an entry and click Object References to open a screen that shows which settings
use the entry.
This field is a sequential value, and it is not associated with a specific address group.
This field displays the name of each address group.
This field displays the description of each address group, if any.
ZyWALL/USG Series User's Guide
Section 42.6.3.1 on page 770
770
Section 42.6.3 on page
for more
769), and