ZyXEL Communications USG40 User Manual page 288

Figure 221 Configuration > Network > Interface > Ethernet > Edit > Add/Edit Extended Options
The following table describes labels that can appear in this screen.
Table 103 Configuration > Network > Interface > Ethernet > Edit > Add/Edit Extended Options
LABEL DESCRIPTION
Option Select which DHCP option that you want to add in the DHCP packets sent through the
interface. See the next table for more information.
Name This field displays the name of the selected DHCP option. If you selected User Defined in
the Option field, enter a descriptive name to identify the DHCP option. You can enter up
to 16 characters ("a-z", "A-Z, "0-9", "-", and "_") with no spaces allowed. The first
character must be alphabetical (a-z, A-Z).
Code This field displays the code number of the selected DHCP option. If you selected User
Defined in the Option field, enter a number for the option. This field is mandatory.
Type This is the type of the selected DHCP option. If you selected User Defined in the Option
field, select an appropriate type for the value that you will enter in the next field. Only
advanced users should configure User Defined. Misconfiguration could result in interface
lockout.
Value Enter the value for the selected DHCP option. For example, if you selected TFTP Server
Name (66) and the type is TEXT, enter the DNS domain name of a TFTP server here. This
field is mandatory.
First IP Address, If you selected Time Server (4), NTP Server (41), SIP Server (120), CAPWAP AC
Second IP (138), or TFTP Server (150), you have to enter at least one IP address of the
Address, Third IP corresponding servers in these fields. The servers should be listed in order of your
Address preference.
First Enterprise If you selected VIVC (124) or VIVS (125), you have to enter at least one vendor's 32-
ID, Second bit enterprise number in these fields. An enterprise number is a unique number that
Enterprise ID identifies a company.
First Class, If you selected VIVC (124), enter the details of the hardware configuration of the host on
Second Class which the client is running, or of industry consortium compliance.
First If you selected VIVS (125), enter additional information for the corresponding enterprise
Information, number in these fields.
Second
Information
OK Click this to close this screen and update the settings to the previous Edit screen.
Cancel Click Cancel to close the screen.
Chapter 10 Interfaces
ZyWALL/USG Series User's Guide
288