Wireless Ap Information: Radio List - ZyXEL Communications USG40 User Manual

Table 61 Monitor > Wireless > AP List > Config AP (continued)
LABEL
Radio 1/2 OP Mode
Radio 1/2 Profile
Override Group
Output Power
Setting
Output Power
Override Group
SSID Setting
Edit
#
SSID Profile
Force Overwrite
VLAN Config
Management VLAN
ID
As Native VLAN
OK
Cancel

7.15.4 Wireless AP Information: Radio List

Click Monitor > Wireless > AP Information > Radio List to display the Radio List screen.
Figure 171 Monitor > Wireless > Radio List
Chapter 7 Monitor
DESCRIPTION
Select the operating mode for radio 1 or radio 2.
AP Mode means the AP can receive connections from wireless clients and pass their
data traffic through to the ZyWALL/USG to be managed (or subsequently passed on to
an upstream gateway for managing).
MON Mode means the AP monitors the broadcast area for other APs, then passes their
information on to the ZyWALL/USG where it can be determined if those APs are friendly
or rogue. If an AP is set to this mode it cannot receive connections from wireless
clients.
Select a profile from the list. If no profile exists, you can create a new one through the
Create new Object menu.
Select this option to overwrite the AP output power setting with the setting you
configure here.
Set the output power of the AP.
Select this option to overwrite the AP SSID profile setting with the setting you configure
here.
This section allows you to associate an SSID profile with the radio.
Select an SSID and click this button to reassign it. The selected SSID becomes editable
immediately upon clicking.
This is the index number of the SSID profile. You can associate up to eight SSID profiles
with an AP radio.
Indicates which SSID profile is associated with this radio profile.
Select this to have the ZyWALL/USG change the AP's management VLAN to match the
configuration in this screen.
Enter a VLAN ID for this AP.
Select this option to treat this VLAN ID as a VLAN created on the ZyWALL/USG and not
one assigned to it from outside the network.
Click OK to save your changes back to the ZyWALL/USG.
Click Cancel to close the window with changes unsaved.
ZyWALL/USG Series User's Guide
207