Discover Printer - ZyXEL Communications USG40 User Manual

The following table describes the labels in this screen.
Table 178 Configuration > Hotspot > Printer Manager > General: Edit
LABEL
Enable Printer
Manager
Nickname
Description
IP Address
Assignment
Get
Automatically
Use Fixed IP
Address
IP Address
Subnet Mask
Gateway
OK
Cancel

22.2.3 Discover Printer

Click the Discover Printer icon in the Printer Manager > General screen to open the following
screen. Use this screen to find connected printers or edit a connected printer's settings. Use
Printer Manager > General > Add to manually configure a printer's IP address and add it to the
managed printer list when the printer is not detected or connected to the ZyWALL/USG.
Figure 339 Configuration > Hotspot > Printer Manager > General: Discover Printer
Chapter 22 Printer Manager
DESCRIPTION
Select this option to turn on this entry in order to allow the ZyWALL/USG to manage this
printer.
Type an optional friendly name for the printer. A nickname must begin with a letter and
cannot exceed 15 characters. Valid characters are [a-zA-Z0-9_-].
Enter a description of this printer. You can use alphanumeric and
characters, and it can be up to 60 characters long.
Select this to make the printer a DHCP client and automatically get the IP address, subnet
mask, and gateway address from a DHCP server.
Select this if you want to specify the IP address, subnet mask, and gateway manually.
This field is enabled if you select Use Fixed IP Address.
Enter the IP address for the printer.
This field is enabled if you select Use Fixed IP Address.
Enter the subnet mask of the printer in dot decimal notation. The subnet mask indicates
what part of the IP address is the same for all computers in the network.
This field is enabled if you select Use Fixed IP Address.
Enter the IP address of the gateway. The ZyWALL/USG sends packets to the gateway when
it does not know how to route the packet to its destination. The gateway should be on the
same network as the printer.
Click OK to save your changes back to the ZyWALL/USG.
Click Cancel to exit this screen without saving.
ZyWALL/USG Series User's Guide
485
()+,/:=?!*#@$_%-"