The Schedule Group Screen - ZyXEL Communications USG40 User Manual

The Year, Month, and Day columns are not used in recurring schedules and are disabled in this
screen. The following table describes the remaining labels in this screen.
Table 320 Configuration > Object > Schedule > Edit (Recurring)
LABEL
Configuration
Name
Date Time
StartTime
StopTime
Weekly
Week Days
OK
Cancel

42.8.3 The Schedule Group Screen

The Schedule Group screen provides a summary of all groups of schedules in the ZyWALL/USG. To
access this screen, click Configuration > Object > Schedule >Group.
Figure 538 Configuration > Object > Schedule > Schedule Group
The following table describes the fields in the above screen.
Table 321 Configuration > Object > Schedule > Schedule Group
LABEL
Configuration
Add
Edit
Remove
Object Reference
Chapter 42 Object
DESCRIPTION
Type the name used to refer to the recurring schedule. You may use 1-31 alphanumeric
characters, underscores(
_
This value is case-sensitive.
Specify the hour and minute when the schedule begins each day.
• Hour - 0 - 23
• Minute - 0 - 59
Specify the hour and minute when the schedule ends each day.
• Hour - 0 - 23
• Minute - 0 - 59
Select each day of the week the recurring schedule is effective.
Click OK to save your changes back to the ZyWALL/USG.
Click Cancel to exit this screen without saving your changes.
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to be able to modify the entry's
settings.
To remove an entry, select it and click Remove. The ZyWALL/USG confirms you
want to remove it before doing so.
Select an entry and click Object References to open a screen that shows which
settings use the entry.
ZyWALL/USG Series User's Guide
), or dashes (-), but the first character cannot be a number.
782