Remote Ssl User Login - ZyXEL Communications USG40 User Manual

• Using RDP requires Internet Explorer
• Sun's Runtime Environment (JRE) version 1.6 or later installed and enabled.
Required Information
A remote user needs the following information from the network administrator to log in and access
network resources.
• the domain name or IP address of the ZyWALL/USG
• the login account user name and password
• if also required, the user name and/or password to access the network resource
Certificates
The remote user's computer establishes an HTTPS connection to the ZyWALL/USG to access the
login screen. If instructed by your network administrator, you must install or import a certificate
(provided by the ZyWALL/USG or your network administrator).
Finding Out More
See Chapter 30 on page 570

31.2 Remote SSL User Login

This section shows you how to access and log into the network through the ZyWALL/USG. Example
screens for Internet Explorer are shown.
Open a web browser and enter the web site address or IP address of the ZyWALL/USG. For
1
example, "http://sslvpn.mycompany.com".
Figure 401 Enter the Address in a Web Browser
Click OK or Yes if a security screen displays.
2
Chapter 31 SSL User Screens
for how to configure SSL VPN on the ZyWALL/USG.
ZyWALL/USG Series User's Guide
582