User Group Summary Screen - ZyXEL Communications USG40 User Manual

Table 208 Configuration > User/Group > User > Add (continued)
LABEL
OK
Cancel

32.2.3 User Group Summary Screen

User groups consist of access users and other user groups. You cannot put admin users in user
groups. The Group screen provides a summary of all user groups. In addition, this screen allows
you to add, edit, and remove user groups. To access this screen, login to the Web Configurator, and
click Configuration > Object > User/Group > Group.
Figure 344 Configuration > Object > User/Group > Group
The following table describes the labels in this screen. See
information as well.
Table 209 Configuration > Object > User/Group > Group
LABEL
Add
Edit
Remove
Object
References
#
Group Name
Description
Member
Reference
32.2.3.1 Group Add/Edit Screen
The Group Add/Edit screen allows you to create a new user group or edit an existing one. To
access this screen, go to the Group screen (see
Add icon or an Edit icon.
Chapter 32 Object
DESCRIPTION
Click OK to save your changes back to the ZyWALL/USG.
Click Cancel to exit this screen without saving your changes.
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
To remove an entry, select it and click Remove. The ZyWALL/USG confirms you want to
remove it before doing so. Removing a group does not remove the user accounts in the
group.
Select an entry and click Object References to open a screen that shows which settings
use the entry.
This field is a sequential value, and it is not associated with a specific user group.
This field displays the name of each user group.
This field displays the description for each user group.
This field lists the members in the user group. Each member is separated by a comma.
This displays the number of times an object reference is used in a profile.
ZyWALL/USG Series User's Guide
Section 32.2.3.1 on page 524
Section 32.2.3 on page
524
for more
524), and click either the