The following table describes the labels in this screen.
Table 319 Configuration > Object > Schedule > Edit (One Time)
LABEL
Configuration
Name
Date Time
StartDate
StartTime
StopDate
StopTime
OK
Cancel
42.8.2.2 The Recurring Schedule Add/Edit Screen
The Recurring Schedule Add/Edit screen allows you to define a recurring schedule or edit an
existing one. To access this screen, go to the Schedule screen (see
and click either the Add icon or an Edit icon in the Recurring section.
Figure 537 Configuration > Object > Schedule > Edit (Recurring)
Chapter 42 Object
DESCRIPTION
Type the name used to refer to the one-time schedule. You may use 1-31 alphanumeric
characters, underscores(
), or dashes (-), but the first character cannot be a number.
_
This value is case-sensitive.
Specify the year, month, and day when the schedule begins.
•
Year - 1900 - 2999
•
Month - 1 - 12
•
Day - 1 - 31 (it is not possible to specify illegal dates, such as February 31.)
Specify the hour and minute when the schedule begins.
•
Hour - 0 - 23
•
Minute - 0 - 59
Specify the year, month, and day when the schedule ends.
•
Year - 1900 - 2999
•
Month - 1 - 12
•
Day - 1 - 31 (it is not possible to specify illegal dates, such as February 31.)
Specify the hour and minute when the schedule ends.
•
Hour - 0 - 23
•
Minute - 0 - 59
Click OK to save your changes back to the ZyWALL/USG.
Click Cancel to exit this screen without saving your changes.
ZyWALL/USG Series User's Guide
781
Section 42.8.2 on page
779),