Language Screen; Ipv6 Screen - ZyXEL Communications USG40 User Manual

43.14 Language Screen

Click Configuration > System > Language to open the following screen. Use this screen to
select a display language for the ZyWALL/USG's Web Configurator screens.
Figure 619 Configuration > System > Language
The following table describes the labels in this screen.
Table 368 Configuration > System > Language
LABEL
Language Setting
Apply
Reset

43.15 IPv6 Screen

Click Configuration > System > IPv6 to open the following screen. Use this screen to enable
IPv6 support for the ZyWALL/USG's Web Configurator screens.
Figure 620 Configuration > System > IPv6
The following table describes the labels in this screen.
Table 369 Configuration > System > IPv6
LABEL
Enable IPv6
Apply
Reset
Chapter 43 System
DESCRIPTION
Select a display language for the ZyWALL/USG's Web Configurator screens. You also
need to open a new browser session to display the screens in the new language.
Click Apply to save your changes back to the ZyWALL/USG.
Click Reset to return the screen to its last-saved settings.
DESCRIPTION
Select this to have the ZyWALL/USG support IPv6 and make IPv6 settings be
available on the screens that the functions support, such as the Configuration >
Network > Interface > Ethernet, VLAN, and Bridge screens. The ZyWALL/USG
discards all IPv6 packets if you clear this check box.
Click Apply to save your changes back to the ZyWALL/USG.
Click Reset to return the screen to its last-saved settings.
ZyWALL/USG Series User's Guide
873