Service Overview - ZyXEL Communications USG40 User Manual

Table 312 Configuration > Object > Address/Geo IP > Geo IP (continued)
LABEL
Type
IPv4 Address
42.6.4.1 Add Custom IPv4/IPv6 Address to Geography Screen
This screen allows you to create a new geography-to-IP address mapping. To access this screen, go
to the Geo IP screen (see
IPv4 to Geography Rules or Custom IPv6 to Geography Rules section.
Figure 530 Geo IP > Add
The following table describes the labels in this screen.
Table 313 Geo IP > Add
LABEL
Country
Address Type
IP Address
IP Starting
Address
IP Ending
Address
Network /
Netmask
IPv6 Address
Prefix
OK
Cancel

42.7 Service Overview

Use service objects to define TCP applications, UDP applications, and ICMP messages. You can also
create service groups to refer to multiple service objects in other features.
• Use the Service screens
list of services and their definitions.
Chapter 42 Object
DESCRIPTION
This field displays whether this address object is HOST, RANGE or SUBNET.
This field displays the IPv4 addresses represented by the type of address object.
Section 42.6.4 on page
DESCRIPTION
Select the country or region that maps to this IP address.
Select the type of address you want to create. Choices are: HOST, RANGE, SUBNET.
This field is only available if the Address Type is HOST. This field cannot be blank. Enter
the IP address that this address object represents.
This field is only available if the Address Type is RANGE. This field cannot be blank.
Enter the beginning of the range of IP addresses that this address object represents.
This field is only available if the Address Type is RANGE. This field cannot be blank.
Enter the end of the range of IP address that this address object represents.
These fields are only available if the IPv4 Address Type is SUBNET. They cannot be
blank. Enter the network IP and subnet mask that defines the IPv4 subnet.
This field is only available if the IPv6 Address Type is SUBNET. This field cannot be
blank. Enter the IPv6 address prefix that the ZyWALL/USG uses for the LAN IPv6 address.
Click OK to save your changes back to the ZyWALL/USG.
Click Cancel to exit this screen without saving your changes.
(Section 42.7.2 on page
ZyWALL/USG Series User's Guide
773
771), and click the Add icon in the Custom
775) to view and configure the ZyWALL/USG's