Config Ap - ZyXEL Communications USG40 User Manual

7.15.3 Config AP

Select an AP and click the Config AP button in the Monitor > Wireless > AP List table to display
this screen.
Figure 170 Monitor > Wireless > AP List > Config AP
Each field is described in the following table.
Table 61 Monitor > Wireless > AP List > Config AP
LABEL
Create new Object
MAC
Model
Description
Group Setting
Radio 1/2 Setting
Override Group
Radio Setting
Chapter 7 Monitor
DESCRIPTION
Use this menu to create a new Radio Profile object to associate with this AP.
This displays the MAC address of the selected AP.
This field displays the AP's hardware model information. It displays N/A (not
applicable) only when the AP disconnects from the ZyWALL/USG and the information is
unavailable as a result.
Enter a description for this AP. You can use up to 31 characters, spaces and underscores
allowed.
Select an AP group to which you want this AP to belong.
Select this option to overwrite the AP radio settings with the settings you configure
here.
ZyWALL/USG Series User's Guide
206