Add Printer Rule; Edit Printer Rule - ZyXEL Communications USG40 User Manual

22.2.1 Add Printer Rule

Click the Add icon to open the following screen. Use this screen to add a new printer.
Figure 337 Configuration > Hotspot > Printer Manager > General: Add
The following table describes the labels in this screen.
Table 177 Configuration > Hotspot > Printer Manager > General: Add
LABEL
Enable Printer
Manager
IPv4 Address
Description
OK
Cancel

22.2.2 Edit Printer Rule

Select an entry in the Printer Manager > General screen and click the Edit icon to open the
following screen. Use this screen to modify the printer's settings. You can't click the Edit icon when
the printer status is sync fail or sync progressing.
Figure 338 Configuration > Hotspot > Printer Manager > General: Edit
Chapter 22 Printer Manager
DESCRIPTION
Select this option to turn on this entry in order to allow the ZyWALL/USG to manage this
printer.
Enter an IPv4 address for the printer.
Enter a description of this printer. You can use alphanumeric and
characters, and it can be up to 60 characters long.
Click OK to save your changes back to the ZyWALL/USG.
Click Cancel to exit this screen without saving.
ZyWALL/USG Series User's Guide
484
()+,/:=?!*#@$_%-"