Mon Mode - ZyXEL Communications USG40 User Manual

Table 89 Configuration > Wireless > AP Management > Firmware (continued)
LABEL
Last Check Success
Apply AP Firmware
Apply
#
Model
Runtime Firmware
Refresh

9.4 MON Mode

Use this screen to assign APs either to the rogue AP list or the friendly AP list. A rogue AP is a
wireless access point operating in a network's coverage area that is not under the control of the
network administrator, and which can potentially open up holes in a network's security.
Click Configuration > Wireless > MON Mode to access this screen.
Figure 205 Configuration > Wireless > MON Mode
Chapter 9 Wireless
DESCRIPTION
This displays the date and time the last check for new firmware was made and whether
the check is in progress (checking), was successful (success), or has failed (fail).
Due to space limitations, the ZyWALL/USG only downloads and keeps AP firmware for
APs it is currently managing. If you connect a new AP to the ZyWALL/USG, the
ZyWALL/USG may need to download a new AP firmware. Please wait while downloading
new firmware as the speed depends on your Internet connection speed. Make sure to
maintain the Internet connection while downloading new firmware.
Click this to download newer Available Firmware from the firmware server and
update the Runtime Firmware version.
This is an index number of a managed AP.
This displays the name of all managable AP models.
This displays the firmware version that the managed AP must have in order to be
managed by the ZyWALL/USG. Firmware for APs that the ZyWALL/USG already has
displays in bold; firmware that the ZyWALL/USG doesn't have or is still downloading is
grayed out. Firmware that is in the download queue will show To be downloaded.
Click this to update the model firmware table.
ZyWALL/USG Series User's Guide
253