The Printout Configuration Screen - ZyXEL Communications USG40 User Manual

The following table describes the labels in this screen.
Table 180 Configuration > Hotspot > Printer Manager > General > Discover Printer: Edit
LABEL
General Settings
Nickname
IP Address Assignment
Get
Automatically
Use Fixed IP
Address
IP Address
Subnet Mask
Gateway
OK
Cancel

22.3 The Printout Configuration Screen

Use this screen to customize the account printout. Click Configuration > Hotspot > Printer
Manager > Printout Configuration to open the following screen.
Figure 341 Configuration > Hotspot > Printer Manager > Printout Configuration
Chapter 22 Printer Manager
DESCRIPTION
Type an optional friendly name for the printer. A nickname must begin with a letter and
cannot exceed 15 characters. Valid characters are [a-zA-Z0-9_-].
Select this to make the printer a DHCP client and automatically get the IP address, subnet
mask, and gateway address from a DHCP server.
Select this if you want to specify the IP address, subnet mask, and gateway manually.
This field is enabled if you select Use Fixed IP Address.
Enter the IP address for the printer.
This field is enabled if you select Use Fixed IP Address.
Enter the subnet mask of the printer in dot decimal notation. The subnet mask indicates
what part of the IP address is the same for all computers in the network.
This field is enabled if you select Use Fixed IP Address.
Enter the IP address of the gateway. The ZyWALL/USG sends packets to the gateway when
it does not know how to route the packet to its destination. The gateway should be on the
same network as the printer.
Click OK to save your changes back to the ZyWALL/USG.
Click Cancel to exit this screen without saving.
ZyWALL/USG Series User's Guide
487