ZyXEL Communications USG40 User Manual page 483

Table 176 Configuration > Hotspot > Printer Manager > General (continued)
LABEL DESCRIPTION
Discover Click this to discover the printer(s) that is connected to the ZyWALL/USG and display the
Printer
printer information in a pop-up window. IPnP is enabled while discovering the printer and
disabled when the discovering process has finished.
Use Printer Manager > General > Add to manually configure a printer's IP address and add
it to the managed printer list when the printer is not detected or connected to the ZyWALL/
USG.
Refresh Click this to update the printer list table.
# This field is a sequential value, and it is not associated with any entry.
Status This icon is lit when the entry is active and dimmed when the entry is inactive.
IPv4 Address This field displays the IP address of the printer.
Registration This field displays whether the printer is added to the managed printer list (Mgnt Printer)
or not (Un-Mgnt Printer).
Uptime This field displays the date and time the ZyWALL/USG last synchronized with the printer.
This shows n/a when the printer is not in the managed printer list or the printer status is
sync fail or sync progressing.
Status This field displays whether the ZyWALL/USG can connect to the printer and update the
printer information.
This shows n/a when the printer is not in the managed printer list.
Nickname This shows an optional friendly name for the printer that you configured.
Firmware This field displays the model number and firmware version of the printer.
Version
This shows n/a when the printer is not in the managed printer list or the printer status is
sync fail.
MAC This shows the hardware MAC address of the printer.
Description This field displays the descriptive name for the printer that you configured.
Printer Firmware
Information
Current Version This is the version of the printer firmware currently uploaded to the ZyWALL/USG. The
ZyWALL/USG automatically installs it in the connected printers to make sure the printers
are upgraded to the same version.
Hotspot License The hotspot license must be registered in order to be activated.
Status
License This field displays whether the service is activated (Licensed) or not (Not Licensed).
Status
License Type This shows whether you have a trial or standard license or none (Trial, Standard, None).
Expiration This shows when your hotspot license will expire.
Date
Apply Click this button to save your changes to the ZyWALL/USG.
Reset Click this button to return the screen to its last-saved settings.
Chapter 22 Printer Manager
ZyWALL/USG Series User's Guide
483