Lvps/Hvps Removal - Lexmark X46x series Service Manual

LVPS/HVPS removal

1.
Remove the rear cover. See
2.
Remove the left side cover. See
3.
Place the printer on its top with the rear facing you.
Note: Be careful to not mar the finish of the printer.
4.
Remove the two screws (A) from the right rear foot assembly.
5.
Disconnect the fuser power cable (B).
"Rear door and lower rear cover removal" on page
"Left side cover removal" on page
A
B
4-74.
4-33.
Repair information
7014-xxx
4-37