Low-Voltage Power Supply (Lvps) Removal - Lexmark X746de Service Manual

Low-voltage power supply (LVPS) removal

See
"Low-voltage power supply" on page 7-7
Disconnect the connector at JLVPS1 connector (A) and at JLVPS2 (B) on the system board.
3.
Remove the cable from the cable restraints (C).
4.
Remove the five LVPS mounting screws (D).
d.
Press the latch and pull back to disconnect the fuser AC cable from the LVPS (E).
e.
Press the latch and pull back to disconnect the power AC cable from the LVPS (F).
f.
Remove the right cover. See
1.
Remove the rear frame cover. See
2.
for the part number.
"Right cover removal" on page
"Rear frame cover removal" on page
7526
4-38.
4-37.
Repair information
4-115
Previous
Next
Go Back