Low-Voltage Power Supply (Lvps) Removal - Lexmark C734 Service Manual

5026

Low-voltage power supply (LVPS) removal

See "Low-voltage power supply" on page 7-7
3.
Disconnect the connector at JLVPS1 connector (A) on the system board.
4.
Remove the five LVPS mounting screws (B).
5.
Disconnect the AC fuser cable (C) from the LVPS.
4-98
Service Manual
1.
Remove the right cover. See
2.
Remove the rear frame cover. See
for the part number.
"Right cover removal" on page
"Rear frame cover removal" on page
4-37.
4-33.