Removing The Alternator Cover; Removing Spacer; Removing Gear Position Sensor; Removing Oil Filter - KTM 690 Enduro EU 2008 Repair Manual

30/DISASSEMBLING THE ENGINE

Removing the alternator cover

18.5

Removing spacer

18.6

Removing gear position sensor

18.7

Removing oil filter

18.8
–
Remove screws
–
Remove dowels.
300004-10
–
Remove the spacer
302124-10
–
Remove screws. Remove the gear position sensor
302126-10
–
Remove O-ring
–
Remove contact pin
300007-10
–
Remove screws. Remove the oil filter cover
–
Pull the oil filter element
Circlip pliers reverse (51012011000) (
300009-10
. Take off the alternator cover.

of the countershaft.

.

and the contact springs


out of the oil filter case.

p. 212)
.

.

with the O-ring.
100