Table of Contents
Advertisement
Infinite
816
Key Telephone
System
SYSTEM PARAMETERS
PROGRAMMING
System Parameters Programming
(Cont'a)
730.12
DATE/TIME
FORMAT
Programming Steps
If the system is in the Programmin g mode,
continue using program codes. If starting to
program here, enter the Progr amming mode
first (See Paragraph 700.4).
To change the format of the LCD display:
a. Dial an asterisk [*I and [38] on the dial pad.
b. Press the desired program button to deter-
mine the date and time display format.
l
LED on = 12 hr, MM/DD/YY
l
LED off = 24 hr. DD/MM/YY
/uu//u
u//j/uu
/////uu
uuuuu
c. Press HOLD to enter data
Descriptton
The LCD Display program controls the display
format of the time and date on
the LCD. By default, the time is set at the 12
hour clock with a range of 1 through 12. This
feature can be changed so the range is 00
through 24 (military time).
Default:
By default,
the date
reads
month/day/ year. 'Ihe display can be changed
to read day/month/year.
The actual time and date is programmed at the
attendant station.
Issue
1, January
1992
730-13
Advertisement
Table of Contents
