Fig. 15 Brake Release - Otto Bock B400 Instructions For Use Manual

and right-hand sides on the motors.
Unlocking the Brake
For activation of the push mode, pull out both red brake re-
lease levers located under the seat on the left-hand and
right-hand sides (fig. 15). In this position, the control unit will
recognise that the brake has been released and automati-
cally deactivate the driving function. The unlocked brake will
be indicated by the flashing "Battery Capacity" LED.
Once the brake unlocking lever has been re-
INFORMATION
leased, all braking systems are deactivated.
Indication
Flashing light
Table 3 Break release indicator on the control panel
B400
Information
Unlocked brake for push
mode
Fig. 15 Brake release
Locking the Brake
To lock the brake, push the red brake release lever inwards.
To reactivate the driving function, you must switch off the
wheelchair controls and then switch them on again.
05 / 2009
Operation
Page 101