Batteries; Fig. 15 Brake Release - Otto Bock B400 Instructions For Use Manual

Operation
Indication
Flashing light
Table 4 Break release indicator on the control panel
Fig. 15 Brake release
38 | Ottobock
Information
Unlocked brake for push
mode
Locking the Brake
To lock the brake, push the red brake release lever inwards.
To reactivate the driving function, you must switch off the
wheelchair controls and then switch them on again.
6.5

Batteries

INFORMATION
Before doing any maintenance work on the batteries,
please read the battery manufacturer's warnings thor-
oughly!
The B400 power wheelchair is equipped with two 50 Ah/
12 V AGM batteries (maintenance free).
The batteries are located under the seat of the power wheel-
chair.
See section 6.3.4 for battery capacity display on the control
panel.
B400