Table of Contents
Advertisement
FRONT WHEEL/SUSPENSION/STEERING
Install the front brake caliper with new mounting
bolts and tighten the bolts.
TORQUE: 44 N m (4.5 kgf m, 32 Ibf-ft)
Install the front wheel (page 13-10).
MOUNTING BOLTS
BRAKE CALIPER
SUSPENSION ARM
REMOVAL
Remove the front carry pipe (page 3-8).
Remove the front wheel (page 13-10).
Remove the two brake hose clamp bolts and the
brake hose from the hose guide.
FM/FE only: Remove the two bolts and front guard
from the lower arm.
Remove the cotter pins from the ball joint studs.
Loosen the ball joint nuts, but do not remove them
yet.
HOSE GUIDE S ^ ^ M FRONT GUARD
I COTTER PINS, BALL JOINT NUTS
Release the ball joints, using the special tool accord-
ing to the instructions described on page 13-15.
TOOL:
Ball joint remover, 28 mm
07MAC-SL00201
Support the wheel hub/knuckle assembly securely.
BALL JOINT REMOVER
13-20
Advertisement
Chapters
Table of Contents
Troubleshooting
