BRAKE SYSTEM
-
cotter pin
-
washer
-
brake pedal
-
brake cable
-
dust seals
INSTALLATION
Apply grease to new dust seal lips and install them
with the flat side facing out.
Apply grease to the groove in the pivot shaft.
Connect the brake cable to the pedal and install the
pedal onto the pivot shaft.
Install the washer and a new cotter pin.
Install the return spring as shown.
Hook the rear brake light switch spring to the pedal
and install the switch stay onto the frame with a
new bolt.
Install the right rear mud guard (page 3-6).
COTTER PIN
WASHER
COTTER PIN
WASHER
15-20