Honda 2005 FOURTRAX FOREMAN TRX500 TM Service Manual page 285

BRAKE SYSTEM
Remove the bracket pin, boot and pad springs from
the caliper bracket.
Remove the caliper pin and boot from the caliper
body.
PIN AND BOOT PAD SPRINGS
CALIPER PIN
AND BOOT
Place a shop towel over the piston.
Do not use high Position the caliper body with the piston down and
pressure air or bring apply small squirts of air pressure to the fluid inlet
to remove the piston.
the nozzle too close
to the inlet.
Remove the caliper piston boot.
Be careful not to Push the piston seal in and lift it out.
damage the piston
c | e a n t h b o Q t d s e g | g r o o v e s c a
|
i p e r
cylinder,
siding surface . . . ... . . . ,. . .
and piston with clean brake fluid.
PISTON SEAL
siding surface.
INSPECTION
Check the caliper cylinder and piston for scoring,
scratches or damage.
PISTON SEAL
CALIPER PISTON
CALIPER CYLINDER
PISTON BOOT
15-12