Honda 2005 FOURTRAX FOREMAN TRX500 TM Service Manual page 126

ENGINE REMOVAL/INSTALLATION
Install frame-to-engine ground cable and tighten the
bolt.
Install starter motor cable onto the motor terminal
and tighten the terminal nut.
Install the rubber cap over the terminal properly.
Install the battery ground cable and tighten the bolt.
STARTER MOTOR CABLE
FE/FM model only: Install the gearshift pedal so that
the lower edge is horizontal, and tighten the pinch
bolt.
Install the following:
- fuel tank (page 6-22)
- carburetor assembly (page 6-17)
- exhaust system (page 3-13)
- left and right inner fenders (page 3-7)
- left and right front mud guards (page 3-7)
- left and right center mud guards (page 3-6)
Fill the crankcase with the recommended engine oil
(page 4-12).
Perform the following inspections and adjustments:
- throttle operation (page 4-5)
- brake pedal free play (page 4-18)
- reverse selector lever free play (page 4-19)
GROUND CABLE
BOLT
PINCH BOLT
GEARSHIFT PEDAL
7-12