CLUTCH/GEARSHIFT LINKAGE
CLUTCH CENTER
Check the clutch center and pressure plate for nicks,
indentations or abnormal wear made by the plates.
CLUTCH OUTER
Check the primary driven gear teeth for wear or
damage.
Check the slots in the clutch outer for nicks, indenta-
tion or abnormal wear made by the clutch discs.
Measure the clutch outer I.D.
SERVICE LIMIT: 29.05 mm (1.144 in)
CLUTCH OUTER GUIDE
Check the outer guide for wear or damage.
Measure the clutch outer guide I.D. and O.D.
SERVICE LIMITS: I.D.:
22.05 mm (0.868 in))
O.D.: 28.93 mm (1.139 in)
PRIMARY DRIVE GEAR
Check the gear teeth for wear or damage.
Measure the drive gear I.D.
SERVICE LIMIT: 29.05 mm (1.144 in)
10-17