Honda 2005 FOURTRAX FOREMAN TRX500 TM Service Manual page 182

CLUTCH/GEARSHIFT LINKAGE
INSTALLATION
Apply locking agent to the stopper arm bolt threads.
Install the return spring, washer (between the arm
and crankcase), stopper arm and bolt, and tighten
the bolt.
TORQUE: 12 Nm (1.2 kgf m, 9 Ibfft)
Install the dowel pin into the shift drum.
Hold the stopper arm with a screwdriver and install
the gearshift cam by aligning the pin hole with the
dowel pin.
Install the washer onto the sub-gearshift spindle.
Install the gearshift plate onto the cam and spindle.
Install the guide plate by aligning the tab with the
groove in the cam. ^_
Apply locking agent to the cam bolt threads. Install
the cam bolt and tighten it.
TORQUE: 16 Nm (1.6 kgf m, 12 Ibfft)
10-22