Centrifugal Clutch - Honda 2005 FOURTRAX FOREMAN TRX500 TM Service Manual

CLUTCH/GEARSHIFT LINKAGE
CENTRIFUGAL CLUTCH
REMOVAL
Remove the front crankcase cover (page 10-6).
Be careful not to Unstake the clutch lock nut.
damage the crank-
S g t { h e s p e c i a ( t o o ( i n t 0 t h e g r o o v e s
j
n t h e d r
j
v e
shaft threads.
p | g t e g n d h o | d jt> g n d
|
o o s e n t h e
|
o c k n u t
TOOL:
Clutch holder
- holder plate
- holder pin
07ZMB-HN20000
07ZMB-HN20100
07ZMB-HN20200
or
07ZMB-HN2A100
(U.S.A. only)
Remove the lock nut and washer.
Remove the centrifugal clutch assembly using the
special tool.
TOOL:
Puller, 35 x 1.0 mm
07933-HA80000 or
07933-HB3000A
(U.S.A. only)
For primary drive gear removal, see page 10-13
"Change Clutch".
CENTRIFUGAL CLUTCH ASSEMBLY
Check the one-way clutch operation.
You should be able to turn the clutch weight assem-
bly counterclockwise smoothly, but the assembly
should not turn clockwise.
Remove the clutch weight assembly from the clutch
drum while turning it counterclockwise.
CLUTCH WEIGHT ASSEMBLY
, CLUTCH DRUM
10-8