Honda 2005 FOURTRAX FOREMAN TRX500 TM Service Manual page 89

LUBRICATION SYSTEM
INSTALLATION
Install the cooling fan assembly in the frame and
tighten the four bolts securely.
Route the motor
wire and breather
hose properly as
shown.
Connect the fan motor 2P connector.
Connect the breather hose to the cooling fan.
Install both engine air guides (page 3-12).
Install both inner fenders (page 3-7).
COOLING FAN ASSEMBLY
CONNECTOR
LOWER OIL COOLER
REMOVAL/INSTALLATION
Drain the engine oil (page 4-12).
Remove the following:
- cooling fan (page 5-5)
- four bolts
- two oil pipes
- two O-rings
- mounting bolts
- collars
- lower oil cooler
Install the lower oil cooler with the collars and
mounting bolts, and tighten the bolts.
5-7