Honda 2005 FOURTRAX FOREMAN TRX500 TM Service Manual page 222

CRANKCASE/TRANSMISSION/CRANKSHAFT/BALANCER
Take care that the Install the special tool onto the rear crankshaft end.
crankshaft and bal-
ancer do not fall out
of the crankcase
when installing the
special tools.
TOOL:
Threaded adapter
Be careful not to let
the connecting rod
press against the
crankcase mating
surface.
07965-VM00300 or
07931-KF00200
(U.S.A. only)
Install the special tools onto the crankshaft and
crankshaft bearing.
TOOLS:
Assembly collar
Assembly shaft
U.S.A. TOOLS:
Assembly collar
Assembly shaft
Special nut
07965-VM00100
07965-VM00200
07965-VM00100
07931-ME4010B
07931-HB3020A
Draw the crankshaft into the bearing inner race.
After installing the crankshaft, make sure the index
lines on the crank weight and balancer driven gear
are aligned.
Install the bearing inner race onto the crankshaft
with the flange side facing in.
Install the transmission (page 12-16).
Assemble the crankcase halves (page 12-27).
12-23