Headlight Aim; Suspension; Steering Handlebar; Nuts/Bolts/Fasteners - KYMCO PEOPLE S 125 Service Manual

3
. INSPECTION/ADJUSTMENT

HEADLIGHT AIM

Turn the ignition switch ON and start the en-
gine.
Turn on the headlight switch.
Adjust the headlight aim by turning the head-
light aim adjusting screw.

SUSPENSION

FRONT
Fully apply the front brake lever and check
the action of the front shock absorbers by
compressing them several times.
Check the entire shock absorber assembly
for oil leaks, looseness or damage.
REAR
Check the action of the rear shock absorber
by compressing it several times.
Check the entire shock absorber assembly
for oil leaks, looseness or damage.
Jack the rear wheel off the ground and move
the rear wheel sideways with force to see if
the engine hanger bushings are worn.

STEERING HANDLEBAR

Raise the front wheel off the ground and
check that the steering handlebar rotates
freely.
If the handlebar moves unevenly, binds, or
has vertical movement, adjust the steering
stem ball race. ( 12-15)

NUTS/BOLTS/FASTENERS

Check all important chassis nuts and bolts for
looseness.
Tighten them to their specified torque values
if any looseness is found. ( 1-11)
3-9
PEOPLE S 4T
Adjusting Nut