Engine Removal/Installation - KYMCO BET & WIN 50 Manual

5

. ENGINE REMOVAL/INSTALLATION

ENGINE REMOVAL
Remove the frame body cover. (  2-2)
Remove the two bolts attaching the air
cleaner case.
Loosen the band between the air cleaner and
carburetor to remove the air cleaner case.
Remove the carburetor cap.
Disconnect the oil pump control cable from
the pump body.
Disconnect the oil inlet line from the oil
pump.
°Ø
After the oil inlet line is disconnected,
plug the oil line opening to prevent oil
from flowing out.
Disconnect the auto bystarter, A.C.
generator, thermosensor wire couplers and
starter motor wire connectors.
Disconnect the fuel tube and vacuum tube
that go to the carburetor from the
.
strainer
Remove the spark plug cap.
Drain the coolant. (  3-10)
Disconnect the water hose.
www.PlanDeGraissage.org
Carburetor Cap
Fuel Strainer
fuel
Oil Inlet Line
BET & WIN 50
Band
AC Generator
Wire
Spark Plug Cap
Water Hose
Air Cleaner Case
Bolt
Oil Pump
Control Cable
5-2