Carburetor Installation - KYMCO Bet & Win 250 Manual

13
. FUEL SYSTEM/CARBURETOR/
FUEL PUMP/ FUEL TANK
Check the heater with battery.
If the heater is getting hot, means the heater
without problem, otherwise the heater has to
be changed.

CARBURETOR INSTALLATION

Tighten the drain screw.
Install the carburetor onto the intake
manifold and tighten the band.
Install the air cleaner connecting tube and
tighten the band.
Connect the throttle cable to the carburetor.
＊
• After connecting the throttle cable,
adjust the throttle grip free play to
2_ 6mm.
Connect the auto bystarter wire.
Connect the fuel tube and vacuum tube to
the carburetor.
Perform the following inspections and
adjustments:
•Throttle grip free play ( 3-3)
•Idle speed ( 3-6)
Install the seat, met-in box and frame center
cover.
13-17
www.PlanDeGraissage.org
Heater
Air Cleaner Connecting
Throttle Cable Tube Band
Intake Manifold Band
Fuel Tube
Auto Bystarter Wire
Bet & Win 250