Cleaning Air Cleaner Foam; Installation Method - KYMCO SPADE 150i Owner's Manual

Cleaning Air Cleaner Foam

Excessive dust accumulation is the main reason for a
horsepower drop.
1. Remove LH Rear Cover first, remove Air Cleaner
Screw.
2. Remove Air Cleaner Element Cover and take out Air
Cleaner Foam.
3. Remove Air Cleaner Foam, wash it, squeeze it dry and
add a few drops of engine oil. (See Figure below)
<Installation Method>
Operate in reversed procedures as removal.
7

If Air Cleaner Foam is not inserted properly, dust may
be sucked into cylinder and cause abrasion, drop of
horsepower and shortened service life of engine.

Never wet Air Cleaner Foam when washing the vehicle
or difficult starting may occur.
CAUTION
Screw
Sponge
Squeeze
Wash
dry
7-5
Cleaner Filter Screen
Squeeze
Engine
dry
Oil