5
. FUEL SYSTEM
AIR CUT-OFF VALVE
DISASSEMBLY
Disconnect the vacuum tube from the air cut-
off valve.
Remove the two screws to remove the air
cut-off valve cover, spring and vacuum
diaphragm.
ASSEMBLY
Install the vacuum diaphragm onto the
carburetor.
Install the spring and air cut-off valve cover
and then tighten the two screws.
*
• Be sure to set the vacuum diaphragm
lip into the groove on the carburetor.
• When installing the air cut-off valve
cover, make sure that the vacuum
diaphragm is properly installed.
VACUUM CHAMBER
DISASSEMBLY
Remove the two vacuum chamber cover
screws and the cover.
Remove the spring and vacuum diaphragm/
piston.
Air Cut-off valve Cover
Vacuum Diaphragm
Screws
Air Cut-off valve Cover
Vacuum Chamber Cover
Spring
Vacuum Diaphragm/Piston
PEOPLE S 4T
Spring
5-6