14
. BATTERY/CHARGING SYSTEM/
A.C. GENERATOR
A.C. GENERATOR CHARGING
COIL
*
The inspection of A.C. generator
charging coil can be made with the engine
installed.
INSPECTION
Disconnect the A.C. generator 3P connector.
Measure the resistance between the A.C.
generator white wire and engine ground with
an electric tester.
Standard: 0.2_
1.2W(at 20℃ )
Replace the A.C. generator charging coil if the
reading is not within the specifications.
A.C. GENERATOR LIGHTING
COIL
*
The inspection of A.C. generator lighting
coil can be made with the engine
installed.
INSPECTION
Disconnect the A.C. generator 3P connector.
Measure the resistance between the A.C.
generator yellow wire and engine ground with
an electric tester.
Standard: 0.2_
1.2W(at 20℃ )
Replace the A.C. generator lighting coil if the
reading is not within the specifications.
RESISTOR INSPECTION
Remove the front cover. ( 2-4)
Measure the resistance between the resistor
lead and engine ground.
Resistances: 30W7.5W: 7.0_
5W5.0W: 4.0_
A.C. GENERATOR
REMOVAL
Remove the rear right side cover. ( 2)
Remove the four bolts attaching the cooling
fan cover to remove the fan cover.
14-7
www.PlanDeGraissage.org
8.0W
6.0W
PEOPL E 125/150
Charging Coil Wire (White)
Lighting Coil Wire (Yellow)
Resistor
Fan Cover
Bolts