9. DRIVE AND DRIVEN PULLEYS/
KICK STARTER
• Broken clutch weight spring
LEFT CRANKCASE COVER
REMOVAL
Loosen the drive belt air tube band screw.
Remove the left crankcase cover bolts and left
crankcase cover.
Remove the seal rubber and dowel pins.
DRIVE PULLEY
REMOVAL
Hold the drive pulley using an universal
holder and remove the drive face nut and
starting ratchet.
Remove the drive pulley face.
Special
Universal Holder
CLUTCH/DRIVEN PULLEY
Remove the drive pulley and drive belt.
Hold the clutch outer with the flywheel
holder and remove the clutch outer nut.
Remove the clutch outer.
Remove the clutch/driven pulley and drive
belt.
Special
9-3
www.PlanDeGraissage.org
Flywheel Holder
Air Tube Band
Screw
Left Crankcase Cover
Starting Ratchet
Drive Pulley Face
Universal Holder
Clutch Outer
Flywheel Holder
PEOPL E 125/150
Bolts