Table of Contents
Advertisement
User Guide
prompts for software selection and configuration. The program loads the utilities and
drivers, applies RAID settings, partitions the disk, and installs the desired operating
system.
Express Setup is intended for the initial setup of the server sys-
tem. Therefore, it clears the contents of the hard disk.
You can also use "Configuration diskette Creator" at "Express Setup" in order to save
or backup parameters for installation.
The Configuration disk is able to have some parameters files that include the
configuration information for the server setup.
If you want to set up the server as before, execute the Express Setup with the
parameters file you used at the time of the initial setup.
Notes:
■
The parameters file is not mandatory to set up the system.
■
If you want to create a parameters file, have a blank floppy
disk (MS-DOS 1.44MB format) ready.
■
If you want to use the drivers located on the "OEM-Disk for
Mass Storage Device" that ships with optional boards, a
parameters file is mandatory.
Caution
236
www.nec-computers.com
Advertisement
Table of Contents
