User Guide
Converting your Tower Server to a Rack-Mount Server
Removing the Front Door and Hinge Plat
1. Press the plastic clip in towards the chassis.
2. Pull the hinge pin out with one hand while supporting the door with the other.
3. Slide the door to remove it from the other hinge pin.
4. Remove the hinge pins and save them for future use.
Figure 9: Removing the Front Door and Hinge Plate
5. Remove the four screws attaching the hinge plate to the chassis and save them
for future use.
6. Remove the hinge plate.
7. Save the hinge plate for future use.
8. Remove the five nylon rivets from the top cover.
1
1: Nylon rivets
2: Front door
3: Door hinge
4: Hinge pin
41
www.nec-computers.com
2
3
4