Table of Contents
Advertisement
User Guide
Reinstallation to Multiple Logical drives
This section describes the procedure for reinstalling the operation system if the
multiple logical drives exist.
Before Re-installing the Operation System
Be sure to make backup copies before re-installing the operation system just in case.
Re-installing the Operation System
1. Start the clean installation following the procedure described in this guide.
2. Specify the partition in which you want to install the operating system when
the following message appears:
The following list shows the existing partitions and unpartitioned space on this
computer.
Use the UP and DOWN ARROW keys to select an item in the list.
*
Cannot modify the drive letter of your system or boot volume. Confirm the
proper drive letter is assigned and then, continue the setup.
3. Continue the clean installation following the procedure described earlier in this
chapter.
* The drive letter of the re-installed system may differ from the one of the
previous system. If you need to modify the drive letter, follow the procedure
"Modifying the Drive Letter".
Modifying the Drive Letter
Be careful that the drive letter of the system or boot volume cannot be modified with
the following procedure.
1. Click Start menu, right-click [My Computer], and specify [Manage] to start
[Computer Management].
2. Specify the [Disk Management] in the left side of the window.
3. Right-click the volume for which you want to modify the drive letter and
specify the [Change Drive Letter and Path...].
4. Click [Yes].
5. Choose the [Assign a drive letter] and specify the drive letter you want to
assign.
6. Click [OK].
7. If the following message appears, click [Yes]:
Changing the drive letter of a volume may cause programs to no longer run.
Are you sure you want to change this drive letter?
8. Close the [Computer Management].
269
www.nec-computers.com
Advertisement
Table of Contents
