Table of Contents
Advertisement
User Guide
Exit Menu
You can make the following selections on the Exit Menu. Select an option using the up
or down arrow keys, then press <Enter> to execute the option. Pressing <Esc> does not
exit this menu. You must select one of the items from the menu or menu bar to exit.
Choices
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Load Custom Defaults
Save Custom Defaults
Discard Changes
Save Changes
Table 20: Exit Menu
Description
Exit after writing all modified Setup item values to NVRAM.
F10 key can be used for this operation.
Exit leaving NVRAM unmodified. User is prompted if any of
the setup fields were modified.
Esc key can be used for this operation.
Load default values for all SETUP items.
F5 key can be used for this operation.
Loads the custom defaults for the BIOS Setup options.
Saves the current values as custom defaults. This menu is
only available once the Load Custom Defaults option has
been used.
Read previous values of all Setup items from NVRAM.
Save changes to NVRAM without exiting the Setup.
89
www.nec-computers.com
Advertisement
Table of Contents
