Table of Contents
Advertisement
User Guide
8. Press Esc to return to the TOP menu and exit the LSI Logic Software RAID
Setup Utility.
Setting Hot Spare
1. Install a hard disk drive to be used as hot spare, and then turn on the server.
2. Run the LSI Logic Software RAID Setup Utility.
3. Select "Objects" → "Physical Drive" from the TOP menu.
The "Objects - PHYSICAL DRIVE SELECTION MENU" screen appears.
4. Move the cursor onto the hard disk drive to be used as hot spare and press
Enter .
5. The "Port #X" screen appears. Select "Make HotSpare."
6. A confirmation screen appears. Select "Yes."
The hard disk drive indication is changed to "HOTSP."
Install a hard disk drive
Run LSI Logic Software RAID Setup Utility
Set for hot spare.
Exit LSI Logic Software RAID Setup Utility
101
www.nec-computers.com
Advertisement
Table of Contents
