Table of Contents
Advertisement
User Guide
KVM console, the mouse does not work. use a keyboard.
■
DOS-based with remote console
Used to set up the server from the management workstation by accessing the server
over the network or via serial port B.
■
Before using NEC ExpressBuilder for initial setup, complete
the hardware configuration.
■
agement card is installed in your system.
■
program.
■
Windows-based
This program is called as "Master Control Menu" that can run under the Microsoft
Windows system (Windows 95 or later and Windows NT 4.0 or later). You can
install the several applications and read the documentation from the menu.
NEC ExpressBuilder for DOS-Based with Local Console
This subsection describes the procedures for using NEC ExpressBuilder for DOS-
based with local console.
Note: When using NEC ExpressBuilder with the remote
Note:
This menu is displayed only when an optional remote man-
No keyboard connected to the server is permitted to run this
295
www.nec-computers.com
Advertisement
Table of Contents
