Table of Contents
Advertisement
User Guide
The power-saving mode is only available when the OS supports the power-saving
feature. Some OS's allow you to set the server to automatically turn in the power-
saving mode when no access is made to the server for a certain period of time or to
select the power-saving mode with a command.
DISK ACCESS Lamp ( )
The DISK ACCESS lamp indicates the state of hard disks in the 3.5-inch hard disk
drive bay.
This lamp lights in green every time any of such hard disks is accessed.
When the DISK ACCESS lamp is lit in amber, it indicates that a hard disk error
occurred. To identify a failed hard disk, see the lamps provided for each hard disk.
When the DISK ACCESS lamp flashes green and amber alternately or amber only, it
indicates that hard disks connected to the internal disk array controller are being
rebuildt (reconfiguration).
Access Lamp
The access lamp for the optical disc drive lights when access is made to a media in the
drive.
Hard Disk Drive Lamp
The disk lamp on the 3.5-inch hard disk drive bay has different meanings depending on
the display status.
■ Lit green
- Indicates that the power is supplied to the hard disk.
■ Blinking green
- Indicates that the hard disk is accessed.
■ Lit amber
- Indicates that the installed hard disk is defective in the disk array configuration.
Figure 100: Hard Disk Drive Lamp
216
www.nec-computers.com
Advertisement
Table of Contents
