Table of Contents
Advertisement
User Guide
If the optical disc drive produces an abnormal noise after
inserting the optical disc, remove the disc, and insert it again.
To remove an optical disc, press the Open/Close button to eject the tray, as described
for inserting it, and then take the disc out of the tray. (The orange-lit access lamp
indicates ongoing disk access. The Open/Close button does not work while the lamp is
lit.)
Your OS may have a command to eject the tray.
When you have taken out the disc, retract the tray back in place.
When you fail to eject
When you fail to eject the DVD-ROM tray with the Open/Close button and take out the
DVD-ROM from the server:
1. Press the POWER switch to power off the server.
The POWER/SLEEP lamp goes off.
2. Insert a metal pin of approximately 1.2 mm in diameter and 100 mm in length
(a straightened large paper clip will make a substitute) into the emergency hole
on the right front of the optical disc drive and gently push it in until the tray is
ejected.
■
Do not use a toothpick or plastic stick that is easy to break.
■
If the above procedure does not let you take out the DVD-
ROM, contact your sales agent.
3. Hold the tray and pull it out.
4. Take out the optical disc.
5. Push the tray back into position.
Caution
Caution
65
www.nec-computers.com
Advertisement
Table of Contents
